中文
Plywood is a veneer of twisted wood or cut the wood into thin wood, and then was bonded with adhesive to three-layer or multi-layer sheet material, Odd number of layers are usually used, also the fiber directions of adjacent laminated veneers are vertically glued to each other. Plywood is one of the used materials of furniture commonly and one of the three boards of wood-based panels. It can also be used for aircraft, ships, trains, automobiles, buildings and packing boxes. Plywood is a veneer of twisted wood or cut the wood into thin wood, and then was bonded with adhesive to three-layer or multi-layer sheet material, Odd number of layers are usually used, also the fiber directions of adjacent laminated veneers are vertically glued to each other. Plywood is one of the used materials of furniture commonly and one of the three boards of wood-based panels. It can also be used for aircraft, ships, trains, automobiles, buildings and packing boxes.
-
Read MoreQuick ViewFancy Plywood
Fancy plywood is a multipurpose plywood which used for wall panel, furniture, and decoration etc.
Face/back: Okoume; Bintangor;Red Canarium; Mersawa; Pencil Cedar;Birch;Red Oak;Walnut
Core: Poplar; Paulownia; Eucalyptus; Meranti; Combi core;
Grade:AA/AA, AA/BB, BB/BB, BB/CC, CC/CC
Glue: MR, Melamine, WBP
Formaldehyde emission: E1, E2
Size: 1220X2440mm(4’x8′), 915x1830mm(3’x6′)Thickness:
10mm – 30mm / as clients request -
Read MoreQuick ViewMelamine Plywood
Melamine plywood is made by Russian Birch, German Beech, Okoume, Bintangor, Poplar or other equivalent top quality wood
material. Veneers are bonded by modified Melamine Glue (MUF).
Face & Back veneer thickness is above 0.6mm, different grades are available according to customers' requirement. Longitudinal veneers are full rotary-cut veneers and Horizontal veneers are made by automatic CNC veneer builder.
Compared with UF Glue, this modified MUF is far more better in formaldehyde emission grade and water-resistant performance.
Low formaldehyde emission and can be cut into small size for re-using
2.Excellent physical performance,wear-resistant,anti-cracking,moisture-proof
3.No color contamination between the conceret and shuttering board
4.Heat resisitant,acid resistant,environmental protection
5.Suitable function is for family decoration and furniture making
6.High bending strength,strong nail holding
7.No chipcore,no knots,no splits and no color differences and little coefficient of expansion
-
Read MoreQuick ViewFilm faced plywood
Film faced plywood is mainly made up of eucalyptus plywood,poplar plywood or eucalyptus and poplar plywood,it is economic and practical for the construction concrete pouring ,for it could be the face panel for any formwork system,for example,stell fram formwrok systerm,single side formwork system,timber beam formwork system,steel props formwork system,scaffolding formwork system etc.
Film faced plywood,shuttering panel formwork board Specification :
Item: film faced plywood, Marine Plywood,Marine plywood for concrete formwork,construction board,shuttering board,shuttering plywood,formwork plywood,brown film faced plywood,black film faced plywood,yellow film faced plywood,red film faced plywood.
-
Read MoreQuick ViewRecycled Plywood
Recycled Plywood: light weight, better be used for high building and bridge construction. High strength and good toughness.
Recycled Plywood: No warp, no distortion, no cleft, well water-resistant, long-playing used and recycled,Flat and perfectly
smooth surface for high grade concrete finishes.Both sides of the template can be used.
Recycled Plywood: It can make a beautiful and slippy surface , and it has long service life. Little thermal conductivity.